Dodo Sound Deadening Instructions

Dodo Sound Deadening Instructions:

Surface Preparation:  The surface you are treating must be clean. Remove any dust or rust. Use a degreasing agent or appropriate organic solvent to degrease greasy surfaces.

Cutting: Use a Stanley knife or similar to cut the product to the desired shape.

Application: Pull back the entire adhesive backing and press the mat onto the metal panel. The use of a roller tool may help remove pockets of air and provide a more even application.

Heat: If the ambient installation temperature is over 10°C, heating is generally unneccessary. However when applying to complex / inverted surfaces or during the colder winter months, warming the material can make application easier and activate the adhesive prior to fitting.

Install Examples: